Two Pump controller with sequencing

Control of 2 pumps/valves between 2 levels fixed by electrode lengths. With facility to change the starting order every cycle.

This dedicated 2 poump controller will operate as a duty/standby system or a duty/assist system and the customer can select the preferred option. Thereis also a facility to give a signal when the second pump is called to run.

This a simple system designed for pumping stations

Using a fixed probe system means there are no moving parts to jam or go wrong.

Cut the electrodes at the point where you want something to happen
If there is any insulation on the electrodes strip back about 50 mm ( 2 inches) and expose the bare metal underneath.
Ensure you have an earth return. This can be the metal tank or the submersed pump or another electrode. If using an earth electrode it must always be the longest electrode in the tank. But it only needs to be slightly longer than the next electrode.
The best position is to place the earth electrode is in the middle of the collection of the electrodes to improve performance.
Remember to use the Hawker level controller which is the brains to make a repeatable reliable system.It is designed to ignore electrode contamination.
If you would like to see a video clip about the controller's ability to ignore ragging then follow this link and if you would like to see a video clip about the controller's ability to ignore foam then follow this link

< Back to application list


Featured Products


Flexicap FCP/4-20

Flexicap Capacitance Transmitter 4-20...

read more

New for January 2018: P8/IS Intrinsically Safe Conductivity Level Controller

ATEX and IECEx certified (to Zone 0) ...

read more
920 Auto sequencer

920 Auto Sequencer for two pumps

Type 920 a dual pump controller with ...

read more

MiniSonda Ultrasonic transmitter

MiniSonda ultrasonic transmitter ...

read more