Capacitance Point Level Probe Products

Stand alone Capacitance probe with relay output. The LS probe is sensitive at the tip allowing it operate in a wide range of applications ranging from cereals and dry beans to air/cement mixture and oil/water interface. The high temperature version works on bitumen. Product build up on the probe is ignored allowing the probes to work in glues, adhesives and pottery slip. The probe operates from a 12 or 24vdc input with a volt free contact output


LS1

Magicap LS1

Stand alone probe with built in relay output. Temperature range from -20 deg C to +85 deg C.
The LS1 is sensitive at the tip only which makes it suitable in applications where it can be contaminated such as glues, bitumen and clay or in interface applications such as aerated cement powder, oil/ water interface detection or aerated wood chip

The sensing tube is manufactured in polypropylene or is also available in Ryton PPS which is practically chemically inert. Standard insertion length is approx 100mm with fixed or adjustable lengths up to 3 metres. Supply voltage is a nominal 24 v DC or 12 v AC.

12v DC units are available to special order (LS1/12)

read more
Magicap LS8

Magicap LS8

Stand alone probe suitable for temperature of 200°C at tip. Sensing tube manufactured in Ryton PPS which is practically chemically inert. Standard insertion length is approx 100mm with extended version up to 305mm (LS8/E305). Stubby versions for use on flyash available (DA1/LS8)
read more

1

Navigation

Featured Products

FCP2/4-20

Flexicap FCP/4-20

Flexicap Capacitance Transmitter 4-20...

read more
Flexilevel 2

Flexilevel 2

Programmable Controller with 4 Digit ...

read more

P8/IS Intrinsically Safe Conductivity Level Controller

ATEX and IECEx certified (to Zone 0) ...

read more
MiniSonda

MiniSonda Ultrasonic transmitter

MiniSonda ultrasonic transmitter ...

read more